When installing a predictive maintenance bridge, ensure that all three antennas are screwed into the correct sockets on the bridge. The bridge needs to be powered using a 230V cable (plugged into a socket) and should be positioned to cover a range of WiFi distance. In industrial settings, it is often limited to 15-20 meters due to the large amount of metal. However, WiFi could travel a lot further in spaces that support this. Once the bridge is plugged in, the LEDs should illuminate to indicate the strength of the connection.
Do not apply the bridge immediately or permanently to an object, check the signals in our software environment first. If you find out that you need more bridges to improve the signals with the sensors, they can easily be ordered in the webshop in the software environment or with your onboarding representative.