The bridge is fully powered by the adapter but the LED keeps flashing red, what to do?
Checks to perform and possible solutions:
Installation
Are all 3 antennas correctly and firmly connected?
Does the power supply has power?
Is the bridge installed close to a frequency inverter? If so, move the bridge as far away (>2m) from the frequency inverter as possible.
Network
In the case of Wi-Fi or 4G, is the network strength on the location of the bridge strong enough?
-
- Are the correct IP addresses opened up? Check the listed IP adresses here.
- Are MAC addresses needed and if so, registered? In case of a secured ethernet or Wi-Fi network
Range reduction
|
Material |
Range reduction |
|
Wood, plaster, glass |
0-10% |
|
Brick, plasterboard |
5-35% |
|
Metal, concrete, mirrors |
10-90% |